Tuesday, February 23, 2010
Wednesday, February 3, 2010
And then it hit me - why can't I just use plain wooden blocks? Then it hit me again - why not paint the blocks and embellish them? Then it came back at me again with brass knuckles - since Valentine's day was coming up why not use some cute hearts? And by this time I was battered and bruised, but inspired nonetheless.
Here's the finished product:
And here's how I did it.
I bought a set of 1 1/4 inch wooden blocks at the craft store and prepared the blocks following Plum Pudding's fabulous tutorial (here). Just get yourself a little saw and a 3/4" drill bit and you're good to go.
Once you've followed those instructions your blocks should be sawed, drilled and magnetized. Next, comes the pretty part.
Paint them. I just used acrylic paint. It's a good idea to slide a scrap piece of paper into the slit after each coat of paint to keep the paint from piling up in there.
Adhere the paper hearts on top of the painted wooden hearts with glue. I used Mod Podge. Once the adhesive is dry take some sandpaper (I used 220 grit) and rough up the edges of the paper and the wooden hearts for a nice distressed look.
I knew I'd be putting mine on the fridge so I centered the hearts on the front of the blocks but if you wanted them to possibly sit on a flat surface for display, make sure to glue the heart up a little higher so the block can sit flat.